Delta

DELTA - VFD - L

DELTA - VFD - EL

The VFD-EL series is multiple function new generation micro type AC drive. It has built in EMI filter, RFI switch, easy DC bus sharing for side-by-side installation, high precision current detection, overload protection, and a built In keypad.

Application
Small size pump & fan, blowing machine, conveyer belt, simple DIY processing equipment.

Specifications
• Output frequency: 0.1~600Hz
• 3 points adjustable V/f curve
• Built-in PID feedback control
• RFI-switch for IT mains
• Built-in EMI filter (for models 230V 1-phase and 460V 3-phase)
• Use RS-485 communication interface (RJ-45) with Modbus protocol
• Optional communication modules for multiple communication protocols, such as Profibus, DeviceNet, LonWorks and CAN open

DELTA - VFD - M

Sensorless Vector Micro AC Drive. The compact design is ideal for small and medium horsepower applications. The M drive is designed to provide an ultra-low-noise operation, and includes several innovative technologies that reduce interference.

Application
Packing machine; dumpling machine; treadmill; temperature/humidity control fan for agriculture and aquaculture; mixer for food processing; grinding machine; drilling machine; small size hydraulic lathe; elevator; coating equipment; small size milling machine; robot arm of injection machine (clamp); wood machine (two-side woodworking planer); edge bending machine, elasticizer, etc.

Specifications
• Output frequency: 0.1~600Hz
• Output frequency 0.1~400 Hz
• Adjustable V/f curve and vector control
• Carrier frequency up to 15 kHz
• Auto torque boost & slip compensation
• Built-in PID feedback control
• Built-in MODBUS communication, baud rate up to 38400 bps
• speed holding function
• Built-in sleep / revival function
• Support communication module (DN-02, LN-01, PD-01)

DELTA - VFD - E

Sensorless Vector AC Micro Drive. The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.

Application
• Smaller cranes; washing machines; treadmilsl; robot arm of injection machine (clamp); elevator; grinding machine; drilling machine; wood machine; webbing loom; air conditioner for large buildings; water supply system for large buildings, etc.
• Specifications
• Output frequency: 0.1~600Hz
• Modular & compact design
• Built-in PLC function
• Built-in EMI filter (230V 1 phase / 460V 3 phase)
• Supports open loop control of permanent motors (PM Sensorles)
• RFI-switch for mains
• Easy DC BUS sharing
• Flexible extension
• Complete Protection

DELTA - VFD - VE

This series adopts FOC (Field Oriented Control) which is a far more precise vector control algorithm. It can be used in both speed control and position control similar to a servo motor drive. The multi-function I/O terminal is expanded to meet users' various application needs. In addition, it is supplied with a Windows based PC software program for managing parameters and dynamic monitoring. It provides an excellent solution for load regulation. It can output 150% of rated torque at zero speed, and it can have "point to point" and relative distance control functions for position control, making it the best choice for challenging industrial control applications.

Application
Power transmission equipment, elevator, crane, CNC tooling machines, extrusion machines, injection molding machines, and auto-storage and retrieval systems.
• Specifications
• utput frequency: 0~600Hz
• 4 points adjustable V/F curve, Sensorless Vector Control, Field-Oriented Control
• Position/Speed/Torque control mode
• Sensorless Vector Control 150% torque at 0.5Hz
• 150% holding torque with speed feedback
• 150% holding torque with speed feedback
• Rotational/Static Auto-tuning for the motor parameters and Auto-tuning for load inertia
• Excellence torque limit in all 4 quadrants of operation
• Dual RS-485 ports, Fieldbus and PC software tools for applications

DELTA - VFD - C2000

The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.

Delta VFD022C23A
• Delta Products AC Drives, C2000 Series
• ITEM # VFD022C23A MFG # VFD022C23A
• Drive, AC, 3HP, 230V, 3PH, 11A

Specifications
• Item Number: VFD022C23A
• Manufacturer: Delta Products
• Item Category: Drives
• Subcategory: AC
• Series: C2000
• Nominal Input VAC: 230 Volts AC
• Input Range VAC: 170 to 265 Volts AC
• Amps (CT): 10 Amps
• HP (VT): 3 Horsepower
• Amps (VT): 11 Amps
• Input Phase: 3
• Operator Controls: Keypad Included
• Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
• Motor Control-Max Level: Closed Loop Vector
• Closed Loop: Yes
• AC Line Regenerative?: Yes
• Dynamic Braking Trans?: Included
• Frame Size: A
• Height: 9.84 Inches
• Width: 5.12 Inches
• Depth: 6.69 Inches

DELTA - VFD - CP2000

Delta's Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. A 3-step V/F curve response is used in the variable torque environment to adequately adjust the input voltage and attain the greatest overall performance; this function is especially helpful in pumps and fans applications. It also includes additional functions for operation and protection in variable load environments, such as flying starts, auto-acceleration/deceleration, momentary power loss restarts, auto-tuning, and more. The CP2000 series provides you with the ultimate energy-saving

Application Fixed-displacement pumps (fix flow and fix time), building automation, factory automation, HVAC drives, cooling pumps, cooling towers and general motor applications.
Specifications
• With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
• With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination..
• The modularized design eases the maintenance and expansion.
• High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients@@ needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
• Long-life design and self diagnosis for key components.
• Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
• Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
• Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding.
make the AC drive to work continuously.
• Multi pumps control at fixed amount, fixed time circulating control. Able to control 8 pumps at the same time. (Such as Image01 and Image02, optional multi-control relay card is required.)

DELTA - VFD - C200

The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.

Application Food packaging machinery, conveyors, textile machinery, woodworking machinery, fans, pumps.
Specifications
• built-in PLC program with 5,000 steps capacity.
• Built-in brake chopper.
• MODBUS RS-485 and CANopen (Slave).
• The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance.
• Supports open loop control of permanent motors (PM Sensorless).
• Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz.
• New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications..
• C200 Series Frame A supports wall mounted installation.